Image

Black spots ingame

General ET: Quake Wars Talk
spaiker13
Newbie
Newbie
Posts: 20
Joined: Wed Dec 31, 1969 7:00 pm
Location: Belgium

Black spots ingame

Post by spaiker13 » Thu Apr 09, 2009 10:57 am

Hey all, I got a problem with the graphics or something with that.
When I load a map, it goes good for a couple of minutes but then suddenly it becomes very dark, (eg slipgate last objective, i can't even see the enemies :eew: )
I have already tried to change the contrast, and all that, lower details and stuff but it didn't work :mad: .
Maybe the problem lies with the gpu who goes to hot or the cpu is to hot (i have overclocked it). I don't know.
Can anybody of you guys help me?
I took a 2 screenshots of it:
http://screenshot.xfire.com/screenshot/ ... 398050.png
http://screenshot.xfire.com/screenshot/ ... ad3ef1.png

Thanks

Greets

Sissyboy
Clan Member
Clan Member
Posts: 873
Joined: Wed Dec 31, 1969 7:00 pm
Location: Playing ETQW at home... or stuck at work

Post by Sissyboy » Thu Apr 09, 2009 11:29 am

I suspect its your overclocked settings and heat problems(probably caused by overclocking).

Trying stepping down a few notches and see what happens.

When my GPU overheats... my puter just shuts down... although it could be the cpu overheating.. not sure.
Will Ban for Stroyent.

spaiker13
Newbie
Newbie
Posts: 20
Joined: Wed Dec 31, 1969 7:00 pm
Location: Belgium

Post by spaiker13 » Thu Apr 09, 2009 11:31 am

But my gpu is always 50-60° (which is normal for a HD4850) and cpu also doesn't go higher as 60° so they are both within the regulated values :shrug:

Sissyboy
Clan Member
Clan Member
Posts: 873
Joined: Wed Dec 31, 1969 7:00 pm
Location: Playing ETQW at home... or stuck at work

Post by Sissyboy » Thu Apr 09, 2009 11:32 am

I see that you adjusted your contrast.

Did you increase your brightness?
Will Ban for Stroyent.

spaiker13
Newbie
Newbie
Posts: 20
Joined: Wed Dec 31, 1969 7:00 pm
Location: Belgium

Post by spaiker13 » Thu Apr 09, 2009 11:35 am

Yes I did and it didn't work either, but if you look at the screens i think it doesn't have anything to do with the ingame settings :/

Sissyboy
Clan Member
Clan Member
Posts: 873
Joined: Wed Dec 31, 1969 7:00 pm
Location: Playing ETQW at home... or stuck at work

Post by Sissyboy » Thu Apr 09, 2009 1:27 pm

New drivers?
Will Ban for Stroyent.

spaiker13
Newbie
Newbie
Posts: 20
Joined: Wed Dec 31, 1969 7:00 pm
Location: Belgium

Post by spaiker13 » Thu Apr 09, 2009 1:30 pm

I already have the newest ati driver, also chipset driver ect. al of them are new (I download all new drivers every month)
Was gone for a while, Came back, Saw what was happening, Started shooting and Owned

HughJorgan
Clan Member
Clan Member
Posts: 307
Joined: Wed Dec 31, 1969 7:00 pm
Location: At Walmart, saving money and living better!

Post by HughJorgan » Thu Apr 09, 2009 1:38 pm

spaiker13 wrote:I already have the newest ati driver, also chipset driver ect. al of them are new (I download all new drivers every month)
Did this just occur since installing the new drivers? Have you tried rolling them back?
BBA - Be there or be nowhere!

spaiker13
Newbie
Newbie
Posts: 20
Joined: Wed Dec 31, 1969 7:00 pm
Location: Belgium

Post by spaiker13 » Thu Apr 09, 2009 1:42 pm

the problems occurd a week after i installed the drivers so that can't be it :s
Was gone for a while, Came back, Saw what was happening, Started shooting and Owned

HughJorgan
Clan Member
Clan Member
Posts: 307
Joined: Wed Dec 31, 1969 7:00 pm
Location: At Walmart, saving money and living better!

Post by HughJorgan » Thu Apr 09, 2009 1:47 pm

Yeah, I got it the first time... :lol:

It still can't hurt to give it a shot and see what happens but it's up to you.
BBA - Be there or be nowhere!

Sissyboy
Clan Member
Clan Member
Posts: 873
Joined: Wed Dec 31, 1969 7:00 pm
Location: Playing ETQW at home... or stuck at work

Post by Sissyboy » Thu Apr 09, 2009 2:36 pm

I agree with Hugh. I would try to roll em back.
Will Ban for Stroyent.

spaiker13
Newbie
Newbie
Posts: 20
Joined: Wed Dec 31, 1969 7:00 pm
Location: Belgium

Post by spaiker13 » Thu Apr 09, 2009 2:40 pm

Ok, i'll try, thanks for the help guys
i'll let you know if it helped
Was gone for a while, Came back, Saw what was happening, Started shooting and Owned

Sissyboy
Clan Member
Clan Member
Posts: 873
Joined: Wed Dec 31, 1969 7:00 pm
Location: Playing ETQW at home... or stuck at work

Post by Sissyboy » Thu Apr 09, 2009 2:45 pm

spaiker13 wrote:Ok, i'll try, thanks for the help guys
i'll let you know if it helped
Good luck.

I hope it helps.

See ya on the server!
Will Ban for Stroyent.

spaiker13
Newbie
Newbie
Posts: 20
Joined: Wed Dec 31, 1969 7:00 pm
Location: Belgium

Post by spaiker13 » Thu Apr 09, 2009 3:36 pm

I first downclocked my cpu just to see if this helps...
And, it helped. If the problems occur now i'll try to roll them back

Thanks for the tips guys

Cya'll on the battlefront :shotgun:

Sissyboy
Clan Member
Clan Member
Posts: 873
Joined: Wed Dec 31, 1969 7:00 pm
Location: Playing ETQW at home... or stuck at work

Post by Sissyboy » Thu Apr 09, 2009 5:17 pm

Good Deal.

Frag ya later!
Will Ban for Stroyent.

Locked