Image

ET on Windows 7

Game Questions and Help / Errors and Game Issues
User avatar
marker77
Newbie
Newbie
Posts: 37
Joined: Wed Dec 31, 1969 7:00 pm

Post by marker77 » Wed Dec 30, 2009 4:59 pm

Ok, just got my computer updated. Have my new 500 gig HD with Win 7 and my secondary HD with Win XP.

I am going to attempt to download ET on my new HD with 7. I haven't done this in a long time. Besides downloading ET, I notice there is patch 2.60 and 2.60b- which one do I need?

Anything else? I fairly sure I save my key on a thumb drive-(we will see)

Thanks!
Last edited by marker77 on Wed Dec 30, 2009 8:32 pm, edited 1 time in total.

tromort
Newbie
Newbie
Posts: 21
Joined: Wed Dec 31, 1969 7:00 pm
Location: Earth.

Post by tromort » Wed Dec 30, 2009 5:49 pm

Install ET, then run the 2.60patch and to finish overwrite et.exe and etded.exe with the 2 files from the 2.60b patch.
and don't forget to get punkbuster updated/administrator rights

User avatar
marker77
Newbie
Newbie
Posts: 37
Joined: Wed Dec 31, 1969 7:00 pm

Post by marker77 » Wed Dec 30, 2009 8:33 pm

Thanks for your help!

User avatar
marker77
Newbie
Newbie
Posts: 37
Joined: Wed Dec 31, 1969 7:00 pm

Post by marker77 » Thu Dec 31, 2009 12:57 am

I ran the 2.60 and 2.60b patch, fairly sure PB is up to date.

When I try to log on any server it says;

Game Code (ui_mp_x86.dll) failed Pure Server Check.

Any clues?

Renovatio_
Newbie
Newbie
Posts: 13
Joined: Wed Dec 31, 1969 7:00 pm
Location: Belgium

Post by Renovatio_ » Thu Dec 31, 2009 3:27 am

Marker77 wrote:I ran the 2.60 and 2.60b patch, fairly sure PB is up to date.

When I try to log on any server it says;

Game Code (ui_mp_x86.dll) failed Pure Server Check.

Any clues?
Check this out -> http://www.bbaservers.com/tutorial-5.html

A lot off people have the same problem

User avatar
marker77
Newbie
Newbie
Posts: 37
Joined: Wed Dec 31, 1969 7:00 pm

Post by marker77 » Thu Dec 31, 2009 10:33 am

Thanks , I will uninstall ET and start over again.

User avatar
marker77
Newbie
Newbie
Posts: 37
Joined: Wed Dec 31, 1969 7:00 pm

Post by marker77 » Sat Jan 02, 2010 9:28 pm

I almost have it. I actually copied the files into my new HD and got into the BBA server 1 with all my tags but punkbuster is booting me.

I am not sure if my admin priviledges are matching up.

Any clues on the punkbuster problem?

Thanks!

User avatar
marker77
Newbie
Newbie
Posts: 37
Joined: Wed Dec 31, 1969 7:00 pm

Post by marker77 » Sun Jan 03, 2010 4:51 pm

Bump it up... Any clues on the PB problem?

tromort
Newbie
Newbie
Posts: 21
Joined: Wed Dec 31, 1969 7:00 pm
Location: Earth.

Post by tromort » Sun Jan 03, 2010 7:35 pm

You copied your old etkey into THE new etmain folder, right?

A/w does pb gives an error when it kickes you?

User avatar
marker77
Newbie
Newbie
Posts: 37
Joined: Wed Dec 31, 1969 7:00 pm

Post by marker77 » Sun Jan 03, 2010 8:04 pm

tromort wrote:You copied your old etkey into THE new etmain folder, right?

A/w does pb gives an error when it kickes you?
I get on the server and PB kicks meoff within a few seconds. I did copy my old key into my etmain folder. When I went on the server I did notice I had the same xp as when I left ad my BBA tags were on.

User avatar
marker77
Newbie
Newbie
Posts: 37
Joined: Wed Dec 31, 1969 7:00 pm

Post by marker77 » Mon Jan 04, 2010 1:05 am

Tonight after getting booted by PB on the BBA 1 server, I attempted to go on other servers and had no problems. I was on a jaymod server with no apparent problems with PB.

I get this:

"Server Disconnected PB kicked Service Comm. Failure"

tromort
Newbie
Newbie
Posts: 21
Joined: Wed Dec 31, 1969 7:00 pm
Location: Earth.

Post by tromort » Mon Jan 04, 2010 7:37 am

hm, since I didn't had time to install win7 again myself, I don't know which of the solutions will work..

you could try to make sure pb service is installed correctly by running this: http://www.evenbalance.com/downloads/pbsvc/pbsvc.exe

or try this: http://www.howtogeek.com/forum/topic/wi ... -territory

or start>run>services / start>search>services
->pnkbstra & pnkbstrb >properties>check allow this service to interact with the desktop

hopefully I can find some time soon to install it again myself.

User avatar
marker77
Newbie
Newbie
Posts: 37
Joined: Wed Dec 31, 1969 7:00 pm

Post by marker77 » Mon Jan 04, 2010 9:44 am

Thanks, I will try some of these you suggested.

User avatar
marker77
Newbie
Newbie
Posts: 37
Joined: Wed Dec 31, 1969 7:00 pm

Post by marker77 » Mon Jan 04, 2010 10:20 am

I ran the PB service utilty and here is the results:


Starting PunkBuster Service Tests (v0.987) (01/04/10 07:17:42)
Checking OS
Windows NT 6.1 (build 7600) 64-bit
Checking PnkBstrA service status RUNNING
Checking PnkBstrA Version OK (1032)
Extracting "PnkBstrB.exe" to:
"C:\Users\Owner\AppData\Roaming\PnkBstrB.exe"
OK
Checking firewall settings OFF
Checking if PnkBstrB is running STOPPED
Getting port for PnkBstrA OK (44301)
Opening socket for packet send OK
Sending version packet to PnkBstrA SENT
Receiving version from PnkBstrA OK
Received 6 bytes from 127.0.0.1:44301
Response = 10062 (ms) Version = v1032
Getting PnkBstrB install instance OK
Sending start packet to PnkBstrA SENT
Waiting for packet from PnkBstrA OK
Received 3 bytes from 127.0.0.1:44301
Response = 17878 (ms) PnkBstrB started.
Load SUCCESSFUL.
Watching for PnkBstrB instance change (2) CHANGED (3)
Getting port for PnkBstrB OK (45301)
Sending version packet to PnkBstrB SENT
Receiving version from PnkBstrB OK
Received 5 bytes from 127.0.0.1:45301
Response = 2996 (ms) Version = 2110
Checking PnkBstrK driver status NOT FOUND
Manually stopping PnkBstrB STOPPED
Removing test PnkBstrB file OK

----------------------------------
Tests finished.

User avatar
marker77
Newbie
Newbie
Posts: 37
Joined: Wed Dec 31, 1969 7:00 pm

Post by marker77 » Mon Jan 04, 2010 12:39 pm

It appears the handy PB utility worked. I went in for a few minutes and didn't get kicked. I did notice it seemed very laggy and not smooth though.

Locked